ENG
72
EAS00287
CHECKING THE PULL LEVER SHAFT AND
PULL ROD
(YZF-R1S)
1. Check:
• pull lever shaft pinion gear teeth
• pull rod teeth
Damage / wear
→
Replace the pull rod and
pull lever shaft pinion gear as a set.
2. Check:
• pull rod bearing
Damage / wear
→
Replace.
INSTALLING THE CLUTCH
(YZF-R1S)
1. Install:
• clutch housing
• conical spring washer
• thrust plate 2
NOTE:
NOTE:
Align the projection of clutch housing
and
hollow of the oil pump drive gear
.
2. Install:
• pressure plate 2
• clutch boss
NOTE:
NOTE:
Fit the groove
of the pressure plate 2 to the
projection
of the clutch boss to assemble.
CLUTCH