SPEC
25
Insert the wire harness wrap-
ping clamp to the hole of the
frame.
Make sure that the lead is fas-
tened with the guide of the
radiator stay.
To the right handlebar switch
Battery negative lead should
not run on the swingarm
bracket.
The hoses should not be
located higher than the throt-
tle body side cap over the up
side of the vehicle.
Do not place it beyond pipe 3
in the direction to the external
part of the vehicle.
Route each lead higher than
the frame plate, pass it to the
inside of the vehicle from the
hole. Leads should be routed
in random order.
Clamp can be inserted in any
direction.
Route each lead lower than
the frame plate. Leads should
be routed in random order.
Clamp can be inserted in any
direction.
Route the leads in random
order.
CABLE ROUTING