CHK
ADJ
31
NOTE:
NOTE:
To find the standard position, turn the adjusting
bolt in direction
until it stop.
1. If the alignment mark on the adjusting bolt
is positioned past the alignment mark on
the front fork cap, turn the adjusting bolt in
direction
until the alignment marks
match.
Turn the adjusting bolt 3 complete turns in
direction
, and be sure the alignment
mark match.
This is the standard position.
2. If the alignment mark on the adjusting bolt
is positioned before the alignment mark on
the front fork cap, turn the adjusting bolt in
direction
until the alignment marks
match.
Turn the adjusting bolt 2 complete turns in
direction
, and be sure the alignment
mark match.
This is the standard position.
Rebound damping
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• rebound damping
a. Turn the adjusting screw
in direction
or .
Direction
Rebound damping is
increased (suspension is
harder).
Direction
Rebound damping is
decreased (suspension
is softer).
Adjusting positions
Minimum: 17 clicks in direction
*
Standard: 12 clicks in direction
*
Maximum: 1 clicks in direction
*
* with the adjusting screw fully turned-in
direction
ADJUSTING THE FRONT FORK LEGS