CHAS
47
10.Install:
• spring seat
• spring guide
• spacer
• clip
• fork spring
• spring seat (upper)
• nut
• damper adjusting rod
• cap bolt
• fork bracket
• fork stay
a. Install the spring seat, spring guide, spacer
and circlip.
b. Install the fork spring, spring seat (upper)
and nut.
c. Press down on the spring seat with the fork
spring compressor
.
d. Pull up the rod puller and install the nut
.
e. Remove the rod puller and adapter.
f. Install the nut
and position it as specified
.
g. Install the damper adjusting rod and cap
bolt, and then finger tighten the cap bolt
until it stop.
NOTE:
NOTE:
Install the cap bolt with rebound damping
screw fully loosened.
h. Hold the cap bolt and tighten the nut to
specification.
i. Remove the fork spring compressor.
WARNING
• The fork spring is compressed.
• Always use a new cap bolt O-ring.
Fork spring compressor
90890-01441, YM-01441
Distance
More than 25 mm (0.98 in)
Nut
25 Nm (2.5 m
•
kg, 18 ft
•
lb)
FRONT FORK