01V96
98
Startup method
Keys on the panel used for the Audio Check
Startup method
While pressing the [HOME (METER)] and [AUX5]
keys, turn the power ON.
Limits
• Possible operation keys are for the DATA ENTRY
SECTION only.
• Parameters cannot be changed according to
communication.
• LED displayed on the panel is for the STEREO
METER only.
• FADER is not effective.
• Fixed parameters:
• INPUT • BUS/AUX/STEREO OUT are all set to
nominal levels.
• Oscillator is output to all BUS/AUX.
• The output of the Oscillator STEREO is OFF.
• Oscillator waveform is set to 1 kHz.
• Oscillator output is set to –20 dB.
• ST swings the PAN to the left and right. The
others have the PAN centered.
3. Audio Check
CAUTION!
Be sure to press the [END] button to complete
the Audio Check.
If the [END] button is not
pressed and the power is turned OFF, the current
memory data of the unit will be erased and the unit
will not return to the condition before the check.
However, if the current memory data: Scene
Memory, Input Patch Library, Output Patch Library,
Surround Monitor Library, and Automix are saved
before starting the Audio Check, this data can be
recovered but other data must be reset.
3-1. Outline
Execute the Audio Check for 01V96.
Check method
Insert the voice signal in the ANALOG, SLOT, and
2TR Digital input, select INPUT CH 1 to 48, and
check the headphone output. If the voice signal
input is not correctly output, the LSI on the selected
signal route is faulty.
Because the built-in oscillator (1 kHz/-20 dB, sine
wave) is output to BUS 1 to 8 and AUX 1 to 8,
select BUS 1 to 8 and AUX 1 to 8 and check
ANALOG, SLOT, and 2TR Digital output set in the
OUT PORT. If the sine wave is not correctly output,
the LSI on the selected signal route is faulty.
[
], [
], [
], [
] keys:
Used to move the cursor
[ENTER] key:
Used to determine the
selection and ON/OFF
[WHEEL]:
Used for the route display
selection and to move the
cursor of the INPUT
・
BUS/
AUX button.
Screen explanation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
17
18
19
20
S1
S2
S3
S4
CH1
21
22
23
24
25
26
27
28
29
30
31
32
BUS1
IN PORT
ADC
BUS
AUX
DSP7-1
IC103
IC201
16, 17
9
66
135
DSP7-2
IC202
128
135
DSP7-3
IC203
128
129
DSP7-4
IC204
97
129
PHONE
INPUT1
INT 48k
INT 48k
END
CLOCK
FS
(c) YAMAHA2003
MODE
CLOCK
FS
END
INPUT button
IC number
INPUT route
IC input PIN number
IC output PIN number
OUTPUT route
01V96 Audio Check
MODE
ANALOG
SLOT
DSP7-4
IC204
1kHz
130
DAC
OUTPUT
OMNI 1
IC151
6
22, 23
ADAT
INPUT
route display
selection
OUTPUT
BUS, AUX buttons
route display
selection
Summary of Contents for 01V96
