PVR Recording
(Continued)
PVR Recording (DTV only)
19
Play
FB
13:39
[00:00:13]
82 J2
FF
Prev.
Next
Stop
Pause
1.
Select a DTV programme you desired to record, press button to
begin recording.
Now a control bar will appear at the bottom screen for you to control.
From the control bar you can obtain information such as channel name,
current time and recorded length, etc.
After some seconds, this control bar will disappear and a mark will glitter
on the top left corder. (To recall the control bar, press
EXIT
).
2.
To stop recording, press the button again.
Channel name
Current time
Recorded length
You can record DTV programs in two ways — instant recording and timer recording.
Instant recording (current program recording)
To record a programme instantly, simply press the
button on your remote control.
Timer recording (future program recording)
EPG (Electronic Program Guide) is your on-screen digital program guide for navigating, selecting, and discovering program
event by time, title, channel. You can also enjoy the scheduling of future recordings by setting the timer recording through
EPG, then go on vacation and come back to watch the program event as if it were live broadcast.
1.
Press
EPG
button to open the
EPG
window.
2. Press
3
or
4
button to select a channel. Press
6
or
5
to navigate and
select a desired program event you want to record.
3. Press
RED
button to open
RECORDER
menu. Now do the following
operations.
A. Mode select:
From
RECORDER
menu, highlight
Mode
item, use
3
or
4
to select a recording mode.
Once
(recording once),
Every Day
(recording everyday),
Weekly
(recording weekly), or
AUTO
(automatically record your selected program event) can be selected.
B.
If you set
Mode
to
Once
or
Every Day
or
Weekly
, you can set
Start
Time
and
End Time
freely:
!
Start Time:
Highlight
Start Time
, then press
4
to open its submenu.
Press
6
or
5
to select
Minute, Hour, Month, Date
item,
use
3
or
4
to adjust the setting. When finished, highlight
Close
and press
OK
.
!
End Time
: Highlight
End Time
, then press
4
to open its submenu. Press
6
or
5
to select
Minute, Hour, Month, Date
item, use
3
or
4
to
adjust the setting. When finished, highlight
Close
and press
OK
.
C. Be sure to press OK button again to save the timer.
D.
Repeat the above steps if you want to schedule more program recording.
Note that only one program can be recorded at the same time.
Once the timer reached,
this program will be recorded and stored at the
connected external memory device.
4. Press
RED
button to return to EPG window.
Note:
!
Future program recording can be done in standby mode. During recording in standby, the backlight is off while the Indicator
turns blue to remind you that the set is at recording. Pressing POWER button can turn on the backlight.
!
During recording, do not change channel or source. If you do want to change channel or source, a reminding message will
pop up.
!
If no disk space left, a warning will pop up and the recording stops.
82 J2
Genius GO GO GO (PTH)
14 May 21:00- 22:00
Genius GO GO GO (PTH)
14 May 2011 21:57
22:00 - 22:30 Fullmetal Alchemist
22:30 - 23:30 Honey & Clover
23:30 - 23:55 Ah! My Goddess
23:55 - 00:00 Changer d’interieurs
00:00 - 00:50 The King Of Adventures
00:50 - 01:45 Wayward Kenting
01:45 - 02:40 Genius GO GO GO (PHT)
85
83
INFO
Info
Return
MENU
Record
Schedule
Remind
Select
Move
Mode
RECORDER
Programme
End Time
EXIT
Return
Select
Move
OK
Start Time
82 J2
Once
11/May 10:30
11/May 12:30
Schedule
