81
2.
To use data encryption, tap
Data encryption (WEP enabled)
.
3.
To use Shared Key authentication, tap
Network Authentication (shared mode)
.
You will need a network key (as provided by your network administrator).
4.
To automatically use a network key, tap
The key is provided for me automatically
.
Otherwise, enter the network key.
5.
For increased security, select
Use IEEE 802.1x network access control
. Then,
select the appropriate
EAP type
.
Starting and Ending a Wireless Network Connection
After you install the wireless network card and set up the wireless network, use the
desired program when you are within the range of wireless network. For example,
switch to Pocket Internet Explorer and browse to a Web page. Your Yakumo
alphaX GPS will automatically connect.
To end the connection, tap the icon
in the Navigation Bar and tap
Disconnect
.
NOTE: When you have finished using the wireless network, complete the actions for
ending the connection. Leaving the wireless network module active will consume more
power.
6.2
Transferring Items Using Infrared
Using infrared (IR), you can send and receive information, such as contacts and
appointments, between two devices.
Sending Information
1.
Switch to the program where you created the item you want to send and locate
the item in the list.
2.
Align the IR ports so that they are unobstructed and within a close range.