![background image](http://html1.mh-extra.com/html/yakima/sparetime/sparetime_manual_3471069003.webp)
1033525H-3/18
INSTALL SPARETIME
Place your
SpareTime onto the
protruding mounting
bracket tongue.
Thread the locking knob
through hole in SpareTime
mast, and into the
mounting bracket.
Tighten locking
knob completely.
Use the key to lock the knob. This helps
protects your SpareTime from theft.
NOTE: When knob is locked the
knob will turn, however, it is
disengaged and cannot tighten, or
loosen the SpareTime. Therefore to
tighten or loosen the knob it must
be in the unlocked position.
Optional
Lock Loop
installation.
If you would like to
use the
Lock Loop
to lock your bikes
to, install it now. It
can be installed as
shown, or rotated
180° so the loop
points downward.
INSTALL SPARE TIRE
It is very important that you follow your
vehicle’s owner’s manual carefully to
properly replace the spare tire.
OPTIONAL OFFSET FEATURE
Remove screws and washers
with provided wrench.
Adjust offset, and secure
with bolts and washers.
You may need to adjust
SpareTime offset to keep
bikes safely centered
behind vehicle.
LOCK LOOP
WASHER