![background image](http://html1.mh-extra.com/html/yakima/spare-joe/spare-joe_manual_3472214002.webp)
1033270A-2/12
right mount
left mount
center mount
• Always use extra strap to secure bicycles to carrier. (Extra strap is not included)
• Straps require tightening before each use, and periodically during transit.
• Never drive off-road with bicycles loaded.
• Load is limited to 2 bikes with a total of no more than 70 lbs.
• Reducing speed on corners or rough roads will reduce the risk of damage to bikes or vehicle.
• Do not let bicycle tires or straps hang near vehicle’s hot exhaust.
• If any strap appears worn or frayed, discontinue use.
• Never modify any carrier parts in order to make them fit.
• Make sure spare tire is securely attached to vehicle and fully inflated before installation of the SpareJoe.
The SpareJoe comes pre-assembled in the right mounting position.
If your vehicle matches this position, skip to step 3.
• For easiest
assembly, place the
main unit on a flat
surface.
• Open the red hub
levers to loosen the
frames.
• Unscrew the hub
cap and remove the
center pin.
READ THESE CAUTIONS BEFORE INSTALLATION
Improper attachment of this product may result in damage to your carrier, bicycles, vehicle, or vehicles driving
behind you. It is your responsibility to ensure a safe installation.
Determine which direction the support arms should face.
Reposition the support arms to fit your vehicle:
SPARE JOE ASSEMBLY
• Remove Support arms and readjust to the
desired position.
• Reinsert center pin and tighten hub assembly.