![background image](http://html1.mh-extra.com/html/yakima/locknload-sl-adapter-2-pack/locknload-sl-adapter-2-pack_manual_3362857004.webp)
Instruction #1036004A - Page 4 of 9
Vehicles with curved rooflines or siderails may require more pitch adjustment.
Assess your vehicle beforehand and set the tower’s pitch to match your vehicle’s
roofline. Adjust the bracket so it will be level once installed on your vehicle.
6.</,1(,167$//$7,21Ă6.</,1(,167$//$7,21Ă6.</,1(,167$/$&,1
1
2
OPEN COVERS.
BACK OUT
ADJUSTMENT SCREW.
2X
8X
Squeeze and pull to
open the covers.
Use the 4mm torque
wrench supplied with
your SkyLine towers to
loosen the adjustment
screw about 8 turns.
2X
3
INSTALL THE ADAPTERS.
“Snap”
Snap the
adapters
into place.
2X
2X
,)1(&(66$5<$'-8677+(3,7&+2)<2856.</,1(72:(5
4
INSTALL THE BRACKET AND PLATES.
“Click”
“Click”
“Click”
3.5 Nm
3.5 Nm
“Click”
“Click”
“Click”
A.
Install the bracket from your LockNLoad
Platform, the plate, and nut insert as
shown. Set the tower pitch. Tighten to
3.5 Nm using the torque wrench.
B.
Then tighten the adjustment screws
to 3.5 Nm using the torque wrench.
A
A
%