![background image](http://html1.mh-extra.com/html/yakima/kingpin-4/kingpin-4_manual_3319504002.webp)
1033601B-2/15
FOr 1-1/4" hitches ONLy.
remOve 2" aDapter.
pULL OUt the piN aND
Wire-LOck FrOm the
hitch pLate.
iNstaLL tONGUe.
Push the tongue into the hitch
plate, aligning the holes.
Install safety pIn and wIre-lock.
• Pivot tongue to fit into hitch plate.
• Align holes and insert pin.
repLace
Wire-LOck.
safety pin and wire-lock
must be in place when
bikes are loaded.
Pin is only removed for
access to vehicle.
tiGhteN with 9/16" wrenches.
attach the stop bolt
and bolt sleeve.
• Install bolt, passing through sleeve.
• Attach nut., TIGHTEN with 9/16"
wrenches.
1-1/2 to 2 threads
should be visible
above the nyloc
portion of the nut.
nyloc
• Remove bolt with wrench.
• Remove adapter.
• Install one of the
hex bolts and a
flat washer.
• Add a second
washer, attach
a nut.