![background image](http://html2.mh-extra.com/html/yakima/holdup-plus2/holdup-plus2_manual_3097441005.webp)
1033534A-5/18
A
B
• PUSh hookS AgAInST TIRES.
• REAR WhEELS SECUREd BY RATChET STRAPS.
• BE SURE ALL hARdWARE IS SECUREd ACCoRdIng To
InSTrUCTIonS.
• ALWAYS SECURE PIvoT ARm WhEn TRAY IS EmPTY.
checK the
InstallatIon
Before drIvIng
awaY.
read all warnIngs on neXt page Before drIvIng awaY.
C
D
Slide the hook
against the rear
wheel cradle.
• Remove safety pin.
• Pull spring pin.
• Replace safety pin.
secure pIvot arms when not In use.
when not carrYIng BIKes alwaYs fold holdup up.
Tilt wheeltray
inboard.
Fold wheeltray
inboard.
rotate pivot
arm inboard.
Pass the locking cable
through your bike
frames and quick-
release wheels. Pass
lock through loop at
end of cable.
Also availiable (sold seperately):
hITChLoCk
(Yakima part number
8007235
) for locking the hitchbolt
to secure your holdUp from theft.
Lock it at the
mast pivot point.
• Remove hitch pin and l
ock to the hitch bolt.
•
Check engagement by pulling on lock.
•
ImPorTAnT: hitch pin must always be used
when the bike lock, or hitch lock are not used!
locK up Your BIKes.
or