1033534A-3/18
fold holdup down.
• Pull spring Pin.
• Fold down holdup
• Spring pin should
snap into place.
Install staBIlIzer pIn.
• Thread plug through loop on lanyard.
• Firmly press plug into hole on base.
Insert staBIlIzer pIn.
• ALWAYS USE
STABALIZEr PIn.
• Completely insert
pin into hole. Pin
will lock into place.
• Use pin when
holdUp Plus2 is in
down position, or up
position.
fold pIvot
arm down.
Be sure pivot arm
is folded down.
attach second traY to Base.
Align holes in base to holes in tray.
UPPEr TrAY:
IMPORTANT: Wheel
strap is to your left, and
pivot arm is to your right.
pivot arm
wheel strap
• Insert bolt, lock-
washer, and washer,
in order shown.
•
Tighten with supplied
wrench.
