1033534A-2/18
remove end cap
from holdup.
Using a flathead screwdriver, remove
the end cap from the holdUp.
Insert plus2 Base Into holdup.
Insert the Plus2 base
into the holdUp tube,
aligning holes.
Align
Install maIn Bolt.
• Insert bolt, and
lock-washer in
order shown.
•
Tighten with
adjustable
wrench.
attach fIrst traY to Base.
Align holes in base to holes in tray.
LowEr TrAY:
IMPORTANT: Wheel strap is
to your right, and pivot arm is
to your left.
pivot arm
wheel strap
• Insert bolt, lock-
washer, and washer,
in order shown.
•
Tighten with supplied
wrench.
rotate to uprIght posItIon.
• Pull spring pin to
release base.
• Lift frame.
• Release spring pin. Pin
should snap into place.
