Instruction #1036042A - page 2 of 6
ASSEMBLY
REMOVE THE HARDWARE.
ASSEMBLE THE BASKET.
Use a screwdriver to remove
the screws and washers
from the ends of the tubes.
1
2
4X
4X
2X
2
Insert the screws
with washers into
each of the holes
and tighten them.
LOOSEN THE KNOBS.
First, push the pin next to the
knobs to the unlocked position.
Completely loosen the knobs by
turning them counter-clockwise
until they no longer turn.
Unlocked
Déverrouillé • Desbloqueado
A
B
INSTALLATION
CAUTION:
Keep
your fingers
away from ALL
moving parts!
1
PREPARE YOUR EXO SYSTEM.
NOTE:
If you are installing EXO GearWarrior™ on the EXO TopShelf™ skip to step 2.
A. To extend the arms, first extend the driver-side arm by pulling the pin and
swinging it outward until the arm locks into place.
B. Then pull the pin for the passenger-side arm and extend it until it locks into place.