![background image](http://html.mh-extra.com/html/yakima/exo-gearwarrior/exo-gearwarrior_manual_893682003.webp)
Instruction #1036042A - page 3 of 6
X Nm
ATTACH THE BRACKETS.
• Orient the brackets as shown.
• Lower them onto the basket
as shown and align the holes.
• Use the wrench to fully
tighten the bolts to 8 Nm.
4X
REMOVAL
Be sure to read all
the warnings and
warranty information
contained in the
insert accompanying
these instructions!
IMPORTANT!
A. Press the locking pins to unlock
the knobs.
B. Completely loosen the knobs by
turning them counter-clockwise
until they are fully open.
C. With the assistance of a friend
lift the EXO GearWarrior™ off
the EXO System.
Unlocked
Déverrouillé • Desbloqueado
2X
Place the basket onto the
cleats as shown.
A. Tilt the the cleats slightly as you slide them along the
tracks of the arms until they can slide no further.
B. Lower the front of the cleats into the track.
C. Tighten both knobs completely and lock them with the key.
D. Then push the pin next to the knobs to locked position.
E. Verify installation by trying to lift up on the cleats.
3
4
INSTALL THE CLEATS.
PLACE THE BASKET.
5
NOTE:
You may need to unlock and loosen the knobs of the EXO system
so the holes in the cleats can perfectly align with the holes in the
brackets. Be sure to retighten and lock the knobs if this step is needed.
Locked
Verrouillé • Bloqueado