1033617D-2/
15
If your vehIcle's hItch Is 1 1/4":
remove the 2" hItch aDapter,
anD the plastIc sleeve.
Remove the bolt from
the adapter using
the hex wrench.
Remove the
adapter, and
sleeve from the
tongue.
for 2" hItches: proceeD
to next step.
Install tongue.
push the tongue into the hitch
plate, aligning the holes.
• Install hex bolt and a flat washer.
• Add a second washer, attach a nut.
Insert tongue Into
vehIcle's hItch.
IF SPARE TIRE CAUSES
INTERFERENCE, DO NOT
USE THIS PRODUCT!
Align the holes in the receiver
to the holes in the tongue.
Install large bolt, lock-washer, anD washer.
NOTE: Flat washer may
be discarded on some
1-1/4" receivers if there
are clearance issues
with receiver.
•
TIgHTEN with adjustable wrench.
•
Install safety pin.
•
install bolt, lock-washer, and washer
from right side of receiver.
Washer must be
used on 2" receivers!
