Instruction #1036057B - Page 3 of 11
APPLY TAPE AND MARK THE CORRECT MOUNTING POINTS.
3
•
Apply masking tape above
the mounting points you
identified in step 2.
•
Use a marker to make a
mark on the masking tape
that corresponds to the
center of the mounting
point hole.
•
Carefully align and reinstall
the weather-stripping.
•
Apply masking tape in the
appropriate locations on
the weather-stripping to
correspond to the marks
made in step 3.
•
Use a marker to transfer
the marks made in step 3
to the masking tape on the
weather-stripping.
Measure and mark .5”
to the left and .5” to the
right of the center marks
you made in step 4.
APPLY TAPE AND MARK THE WEATHERSTIPPING.
MEASURE AND MARK THE WEATHER-STRIPPING.
4
5
1
2X
CAUTION:
The
weather-stripping
must be aligned
properly prior to
making the marks.
