Yaesu WIRES-X TM-400XDE Instruction Manual Download Page 37

Page: 37 / 66

Connecting to a node or a room on the Internet

The Portable Digital Node Mode may be not connected to anything other than a Digital Room or a Digital Node. In order to

connect with the analog node station, it is necessary to use the

Portable HRI Mode

(page 49).

Connection to an Internet Digital Node or a Digital Room may be made in the following two ways:

(1) Connecting to a node or a room by operating the WIRES-X software on the PC
(2) Connecting to a node or a room by operating the transceiver of the portable node

(1) Connecting a node or a room by operating the WIRES-X software on the PC

On the WIRES-X software main screen, you can easily connect to the desired room or node station.
1.

Click the

Digital Node

Digital Room

to connect.

•

Icon of a digital room or a digital node

: Digital Open room (Only the Digital Nodes

may be connected)

: Digital Node Station
: Portable Digital Node Station

Right-click on the selected

Digital Node

Digital Room

The command list is displayed.

Click the [

connect

When a connection is successfully established, the

IDLE indicator “

” will change to the NET

indicator “

”, and the User ID of the connected

Node station or Room “

” is displayed.

“

Connected

” will appear on the LCD of the portable

node station's transceiver or the transceiver accessing

the portable node station in WIRES-X mode.

Room Pop-up Window

When connecting to the room a window will pop up displaying the operational status of the room. For details, refer

to “

Room pop-up window

” (page 56).

Summary of Contents for WIRES-X TM-400XDE



































































Search results

Summary of Contents for WIRES-X TM-400XDE

Reviews:

Related manuals for WIRES-X TM-400XDE

Brands by name

Popular brands

Yaesu WIRES-X TM-400XDE, Instruction Manual

Search results

Summary of Contents for WIRES-X TM-400XDE

Reviews:

Related manuals for WIRES-X TM-400XDE

Brands by name

Popular brands