6
System Requirements (Operating Environment)
Supported Transceivers
•
FT5D, FT3D, FT2D
,
FTM-400XDR/XDE/DR/DE, FTM-300DR/DE, FTM-200DR/DE
or
FTM-100DR/DE
（
As of Feb
2022
）
Connection Cables
FT5DR/DE, FT3DR/DE or FT2DR/DE
•
SCU-39
WIRES-X Connection Cable Kit
(The SCU-39 includes SCU-19, CT-44, and two audio cables.)
FTM-400XDR/XDE/DR/DE or FTM-100DR/DE
When communicating with a digital node station in a portable digital mode
•
SCU-20 PC Connection Cable
(Supplied with the transceiver)
When communicating with a digital node station or an analog node station in the portable HRI mode via
the Internet
•
SCU-40
WIRES-X Connection Cable Kit
(The SCU-40 includes the SCU-20 and an audio cable.)
FTM-300DR/DE or FTM-200DR/DE
•
SCU-40
WIRES-X Connection Cable Kit
(The SCU-40 includes the SCU-20 and an audio cable.)
The latest WIRES-X Software and Transceiver Firmware
Update to the latest software and firmware on YAESU website.
•
WIRES-X Software
：
Ver.1.540 or later
•
FT5D
MAIN: Ver.1.01 or later, SUB: Ver.1.01 or later, DSP: Ver.7.11 or later
•
FT3D
MAIN: Ver.1.01 or later, SUB: Ver.1.01 or later, DSP: Ver.7.02 or later
•
FT2D
MAIN: Ver.3.10 or later, SUB: Ver.2.01 or later, DSP: Ver.4.31 or later
•
FTM-400XD
MAIN: Ver.4.40 or later, DSP: Ver.4.31 or later
•
FTM-300D
MAIN: Ver.1.0 or later, SUB: Ver.1.0 or later, DSP: Ver.7.10 or later
•
FTM-200D
MAIN: Ver.1.0 or later, SUB: Ver.1.0 or later, DSP: Ver.7.11 or later
•
FTM-100D
MAIN: Ver.2.40
or later, PANEL: Ver.2.10 or later, DSP: Ver.4.31 or later
PC
• OS
：
Microsoft
®
Windows
®
8.1 / 10
• Processor Clock Frequency
：
2.0 GHz or faster
• HDD
：
1 GB or more of available space
• RAM
：
2 GB or more
• Display resolution
：
1366 x 768 16-bit high color or higher (32-bit true color is recommended)
• USB port
：
USB 2.0 (Full Speed)
• LAN port
：
100BASE-TX/1000BASE-T or Wi-Fi
：
IEEE 802.11 b or higher
• Audio Interfaces*
1
*
1
Sound function is also required when using the “
Portable Digital Node Mode
” or “
Portable HRI Mode
”.
Furthermore, when communicating in “
Direct Operation
” in “
Portable HRI Mode
” using the
FT5D, FT3D
or
FT2D
the personal computer must have the “audio input from the microphone terminal pass to the speaker
output” function.
•
3.5 Φ speaker terminal, 3.5 Φ microphone terminal
*2
(It is necessary only for Internet communication in “Portable
HRI Mode”.)
*2
In the case of a unique terminal such as a laptop, adapt it to a 3.5 Φ speaker terminal and 3.5 Φ microphone terminal
with a commercially available conversion cable.
• Speaker (It is necessary only when communicating in “Direct Operation” in “Portable HRI Mode”.)
Internet Connection
• ADSL 8 Mbps or faster (No fixed or dynamic global IP address is required.)
When the Internet line speed is low or unstable, the sound may be interrupted or the connection of the WIRES-X
connection may become unstable.
