VX-6R/E O
PERATING
M
ANUAL
95
Set Mode Item 25
[
EDG.BEP
]
Function
: Enables/Disables the Band-edge Beeper while selecting the frequency via the
DIAL
knob.
Available Values
: OFF/ON
Default
: OFF
Set Mode Item 26
[
EMG S
]
Function
: Selects the alarm(s) utilized when the Emergency function is engaged.
Available Values
: BP+STR/BEAM/BP+BEM/CW/BP+CW/BEEP/STROBE
Default
: BP+STR
BP+STR: Loud “Alarm” sounds and the
TX/BUSY
indicator flashes.
BEAM:
The
TX/BUSY
indicator glows continuously in white.
BP+BEM: Loud “Alarm” sounds and the
TX/BUSY
indicator glows continuously in white.
CW:
Transmits the Morse Code “SOS” (• • •
– – –
• • •) message on the air begin-
ning one minute after activation of the Emergency function.
BP+CW: Loud “Alarm” sounds and the Morse Code “SOS” (• • •
– – –
• • •) message is
transmitted on the air beginning one minute after activation of the Emergency
function.
BEEP:
Loud “Alarm” sounds.
STROBE: The
TX/BUSY
indicator lamp flashes.
When the radio is set to the CW or BP+CW mode, the radio will be instructed to send “DE
(your callsign)” after the sending of the SOS message, if your callsign is entered via Set
Mode Item 14:
CW ID
.
Set Mode Item 27
[
HLF.DEV
]
Function
: Reducing the Deviation level by 50 %.
Available Values
: OFF/ON
Default
: OFF
Set Mode Item 28
[
HM/RV
]
Function
: Selects the Primary function of the [
HM/RV
(
EMG
)
R/H
] key.
Available Values
: REV/HOME
Default
: REV
REV:
Pressing the [
HM/RV
(
EMG
)
R/H
] key reverses the transmit and receive frequen-
cies during repeater operation.
HOME: Pressing the [
HM/RV
(
EMG
)
R/H
] key instantly recalls a favorite “Home” chan-
nel.
Set Mode Item 29
[
INT CD
]
Function
: Selects the Access Number (DTMF digit) for WIRES
TM
operation.
Available Values
: DTMF 1 - DTMF F
Default
: DTMF 1
S
ET
(
M
ENU
)
M
ODE
