Yaesu VX-6 Operating Manual Download

Page: 109 / 112

VX-6R/E O

PERATING

ANUAL

107

Make sure that the transceiver is off. Remove the hard or soft case, if used.

Remove the battery pack.

Locate the connector for the

SU-1

under the caution seal in the battery compartment

on the back of the radio, just peel off the caution seal.

Align the connector on the

SU-1

with the transceiver’s connector and gently press the

unit into place.

Affix the new (supplied) caution seal, and replace the battery.

Installation is now complete.

NSTALLATION

THE

SU-1

(

PTION

)

Important note

The Barometric Pressure/Altitude features of the optional

SU-1

are designed to be

supplemental aids for the information of the user, and are not intended to be a
substitute for accurate, calibrated Barometer or Altimeter devices used for naviga-
tion critical to personal safety.

Summary of Contents for VX-6

















































































































Search results

Summary of Contents for VX-6

Reviews:

Related manuals for VX-6

Brands by name

Popular brands

Yaesu VX-6, Operating Manual

Search results

Summary of Contents for VX-6

Reviews:

Related manuals for VX-6

Brands by name

Popular brands