Yaesu VX-6, Operating Manual

Page: 74 / 112

VX-6R/E O
PERATING
M
ANUAL
72
Operation (Accessing an FRG Node)
1. Press the [
F/W
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 30: INT MD .
3. Press the [
0
(
SET
)] key to enable adjustment of this Set Mode
Item.
4. Rotate the
DIAL
knob to set this Set Mode Item to “
FRG
” (thus
activating the “Other Internet Link System” mode).
5. Press the
PTT
switch to save the new settings.
6. Press the [
(
LK
)
TXPO
] key momentarily to activate the Internet
Connection feature. The “ ” icon will appear in the upper right
corner of the display.
7. Rotate the
DIAL
knob while pressing the [
(
LK
)
TXPO
] key to select the Internet
Memory register number ( F 0 ~ F63 ) corresponding to the
Internet link repeater to which you wish to establish an Internet
link, then press the
PTT switch momentarily to lock in the se-
lected access number.
8. Once the Internet Connection feature is activated per step 6 above, you may now press
the [
(
LK
)
TXPO
] key, while you are transmitting, to send out
the selected DTMF string (to establish the link to the desired
Internet-link mode).
9. To return to the WIRES™ mode, repeat steps 1 - 5 above, selecting “ SRG ” in step 4.
You may send out another DTMF string which has been stored in the Internet Memory
resister (
F 0
~
F63
). To do this:
1. Press the
PTT
switch.
2. Press the [ P
(
DMR
)] key while pressing the
PTT switch.
3. Rotate the
DIAL
knob, while pressing the
PTT
switch, to select the Internet Memory
register number ( F 0 ~ F63 ) corresponding to the Internet link repeater that you wish
to contact, then press the [
P
(
DMR
)] key again to send out the selected DTMF string.
I
NTERNET
C
ONNECTION
F
EATURE
FRG
(
“F
RIENDLY
R
ADIO
G
ROUP
”
)
MODE