VX-6R/E O
PERATING
M
ANUAL
89
S
ET
(
M
ENU
)
M
ODE
S
ET
M
ODE
I
TEM
41 [ON TMR]
42 [OPN.MSG]
43 [PAGER]
44 [PAG.ABK]
45 [PAG.CDR]
46 [PAG.CDT]
47 [PSWD]
48 [PTT.DLY]
49 [RESUME]
50 [RF SQL]
51 [RPT]
52 [RX MD]
53 [RXSAVE]
54 [S SRCH]
55 [SCN.LMP]
56 [SHIFT]
57 [SKIP]
58 [SPLIT]
59 [SQL]
60 [SQL.TYP]
61 [STEP]
62 [SU1.ALT]
63 [SU1.BRM]
64 [SU1.SET]
65 [TEMP]
66 [TN FRQ]
67 [TOT]
68 [TS MUT]
69 [TS SPD]
70 [TXSAVE]
71 [VFO MD]
72 [WAKEUP]
73 [WX ALT]
F
UNCTION
Set the ON Timer time.
Selects the Opening Message that appears when the radio is pow-
ered on.
Enables/disables the Enhanced CTCSS Paging & Code Squelch
function.
Enables/disables the Answer Back function of the Enhanced CTCSS
Paging & Code Squelch.
Setting the Receiver Pager Code for the Enhanced CTCSS Pag-
ing & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced CTCSS Pag-
ing & Code Squelch.
Programs and activates the Password feature.
Select the time delay between when the PTT switch is pressed and
the carrier is transmitted.
Selects the Scan Resume mode.
Adjusts the RF Squelch threshold level.
Sets the Repeater Shift Direction.
Selects the receiving mode.
Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Selects the Smart Search Sweep mode.
Enables/Disables the Scan lamp while paused.
Sets the magnitude of the repeater Shift.
Selects the Memory Scan “Skip” channel-selection mode.
Enables/Disables split CTCSS/DCS coding.
Sets the Squelch threshold level.
Selects the Tone Encoder and/or Decoder mode.
Setting of the synthesizer steps.
Selects the measurement units for the altimeter, and correcting the
altimeter.
Selects the measurement units for the Barometric Pressure, and
correcting the Barometric Pressure.
Selects the display of the sensor units’ information.
Indicates indicate the current temperature inside the transceivre’s
case and selects the measurement units (“°F” or “°C”) for the tem-
perature sensor.
Setting of the CTCSS Tone Frequency.
Setting of the TOT time.
Enables/Disables the receiver audio output during the Tone Serch
Scanner is activated.
Selects the Tone Serch Scanner speed.
Enables/Disables the Transmitter Battery Saver.
Enables or disables the VFO band edge limiting for the current
band.
Setting of the Wakeup feature.
Enables/Disables the Weather Alert Scan feature.
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TALIC
)
OFF
/
00H10M (00:10) - 24H00M (24:00)
(10 minutes multiples)
DC
/ MSG / OFF
OFF
/ ON
OFF
/ ON
(
05_47
)
(
05_47
)
--
OFF
/ 20MS / 50MS /
100MS / 200MS
3 SEC /
5 SEC
/ 10 SEC /
BUSY / HOLD
OFF
/ S1 / S2 / S3 / S4 / S5 /
S6 / S7 / S8 / S9 / S9+
SIMP
/ –RPT / +RPT
AUTO
/ N-FM / AM / W-FM
200 MS
/ 300 MS / 500 MS /
1 S / 2 S / OFF
SINGLE
/ CONT
ON
/ OFF
0.00 - 149.95 MHz
2
(50 kHz increments)
OFF
/ SKIP / ONLY
OFF
/ ON
LVL 0 - LVL 15 (Narrow FM:
LVL 1
),
LVL 0 - LVL 8 (Wide FM:
LVL 2
)
OFF
/ TONE / T SQL /
DCS / RV TN
5.0k / 10.0k / 12.5k / 15.0k / 20.0k /
25.0k / 50.0k / 100.0k /
AUTO
M / Ft
1, 3
Offset: –1000 -
0
- +1000
HP / MB / HG / IC
1, 3
Offset: –1000 -
0
- +1000
OFF
/ BARO / ALTI
3
--
50 standard CTCSS tones (
100 Hz
)
OFF / 1MIN /
3MIN
/ 5MIN / 10MIN
ON
/ OFF
FAST
/ SLOW
OFF
/ ON
BAND
/ ALL
OFF
/ 5S / 10S / 20S / 30S / EAI
OFF
/ ON
1: Depends on the transceiver version.
2: Depends on the frequency band.
3: Requires optional
SU-1
.
