Mode Setting
Auto/Manual Mode
Auto/Manual Mode
The light of LED will turn on and off repeatedly every time
pressing Auto/Manual button.
Auto Mode (LED Lighting)
■
Press Auto/Manual BUTTON and keep LED lighting.
・
When it remains a label on the sensor, another label will come
automatically on the sensor after taking the label.
・
When it is no label on the sensor, label will come after switching to Auto
mode.
・
When power button turning off as Auto mode remains switching on, the
light of LED will be blinking when switching on again.
・
The light of LED will be blinking if you adjust stop position for label while
it remains Auto mode.
・
In the case of LED blinking, pressing Auto/Manual BUTTON twice and
LED will be lighting on.
Manual Mode (LED Lights-Out)
■
Press Auto/Manual BUTTON and LED will be lighting off.
■
Press START BUTTON and label will come out.
(When label is on the sensor, no additional label will come out)
長押し
1秒Fモード表示
9
LED lighting
LED lights out
When you take the label out,
feed next label automatically
and stand by.
When you press the Start
Button, feed next label and
stand by.
Auto Mode
Manual Mode
F Mode (Motor Speed setting Mode)
F Mode
In order to improve the accuracy of label dispensing position, feeding speed
adjusting automatically is programmed.
When F mode is setting lower than 29, feeding speed will be automatically
set between 50 and 90.
When F mode is setting over 30, feeding speed will be set by 100 at maximum.
Please adjust F mode when necessary to change feeding speed.
F mode can be set by the number from 50 to 100, which is increased by 10.
The following is the way of F mode setting.
■
F mode setting by +button and -button
(The number shown is 100 at maximum)
■
L mode setting by +button and -button to press longer than 1 second
(NOTICE)
★
The speed is no lower than 50
★
The speed is no faster than 100
★
After feeding speed setting, feeding speed will be reset to the original
speed when changing L mode.
Set F-mode
Press Start Button longer
Indicate F
Set motor speed
Set L-mode
Press Start Button longer
Indicate L
Set motor speed
