background image

Warning 

Do not plug in, unplug the cord, or operate the machine with wet
hands.

Failure to observe this may result in injury due to electric shock.

Never insert your finger, or any other body part, or any foreign
object into the machine.

Failure to observe this may result in injury.

Keep hair or loose clothing away from the machine while it is
operating.

Failure to observe this may result in injury.

This machine is intended for industrial use only.

Do not allow untrained operators or children to operate the machine.

Failure to observe this may result in injury.

Turn off the power switch and unplug the machine prior to replacing
the blade unit or peforming any maintenance on the machine.

Failure to observe this may result in serious injury.

Do not use this machine for anything other than its specified
applications.

Use of the machine for any unintended applications can cause injury
to the operator or failure of the machine.

Please do not put any substances into the outlet for label.

It may cause the origin of the troubles.

Please do not use this machine expect for label removal.

It may cause the origin of unexpected injury and the troubles.

4

Summary of Contents for LDX-60

















Reviews: