12
START
REV
If roller doesn't rotate even though following the instructions and pressing
REV BUTTON, please turn off and stop using the machine.
If something is wrong with the machine like display E-01 or machine stops
by any accidents with no display of the error, please turn off and stop using
the machine.
If motor stops and display disappears, please turn the switch off and turn the
switch on after waiting for a few minites.
Although turning the switch on and nothing happens, please turn the switch off
and stop using the machine.
Maintenance
Error Message
E-01 Motor Stop
■
Cleaning for the machime
Wipe the machine with some kind of the cloth permeates some natural detergent drop in the water.
■
In the area of the sensor
・
Sensor will not detect the label if obstructs the orifice of the sensor.
・
Wipe the lens of the sensor with some kind of cotton stick if dirties in the orifice of the sensor.
Please note that you don't make any scratches on the lens of the sensor.
■
Removal of the label
・
When removing the label stuck on the machine, please remove the label as adhesive doesn't leave on the
machine.
・
When removing the label stuck on the roller inside machine, remove it by using minus screw driver and
remove the cover.
When the machine stops with a buzzer, error message will be displayed as follows.
In that case, please follow the normal procedure after solving the origin of the error.
When Label is transferring, motor is overlorded and stopped.
■
Cut the backing paper by cutter.
■
Press Label Holder Lock Lever and lift Label Holder up from Removal Plate.
■
Pull backing paper out while pressing REV BUTTON.
■
Make sure that there is no stuck label around the roller.
・
When some stuck label on the roller is found, remove the body cover and
clean it up.
・
When removing the body cover, make Label Holder wider and lift up by
pushing left and right internally.
・
Press START BUTTON as it remains the above status and make sure that
the roller works properly.
■
Set the label as follow the normal procedure.
Cut backing paper
Pull backing
paper out
Checking operate
Set the label
