Yaesu FTM-200DR, Advance Manual

Page: 62 / 67

62
CLONE
All the data saved on the transceiver directory may be copied (Cloned) to other FTM-
200DR/DE transceivers.
For details, see “Copying the Radio Data to another Transceiver” (page 30).
RESET
You can restore the settings and memory contents of the transceiver to the factory default
settings, and use the preset functions.
118 CALLSIGN
The call sign ID registered to the transceiver may be changed using the set menu.
1. Press and hold the [
F
MENU
] key

[ 118 CALLSIGN ]

Press the DIAL knob
2. Press the DIAL knob.
The first letter of the call sign ID blinks.
3. Rotate the DIAL knob to select the desired letter then press the DIAL knob.
The cursor movers to the right.
• Up to 10 alphanumeric characters including hyphen and slash may be input.
4. Repeat step 3 to complete to inputting the new call sign.
5. Press and hold the
DIAL knob.
The new call sign is displayed.
6. Press the [ DISP ] key.
Sets the call sign and returns the display to the previously viewed operating screen.
119 MEMORY CH RESET
Delete the registered data from the memory channels.
1. Press and hold the [
F
MENU
] key

[ 119 MEMORY CH RESET ]
2. Press the DIAL knob.
The confirmation screen will be displayed.
3. Rotate the DIAL knob to select [ OK ], then press the DIAL knob.
Erase all memory channels and the transceiver will restart.
120 APRS RESET
Reset the APRS setting.
1. Press and hold the [
F
MENU
] key

[ 120 APRS RESET ]

Press the DIAL knob
2. Press the DIAL knob.
The confirmation screen will be displayed.
3. Rotate the DIAL knob to select [ OK ], then press the DIAL knob.
Erase all APRS settings and it will restart automatically.