Yaesu FTM-200DR, Advance Manual

Page: 11 / 67

11
5. Press the DIAL knob or the [ SQL
BACK
] key.
6. Press any key (except Power Switch) to save the detected tone frequency and return
to normal operation.
Digital Code Squelch (DCS) feature
The Digital Code Squelch opens the speaker audio only when a signal containing the spec-
ified DCS code is received. The DCS code may be selected from 104 types (from 023 to
754).
The DCS Squelch does not function in digital mode. Press the [D X] key to change from
Digital to Analog FM or AMS mode.
Setting the DCS CODE
1. Press the [ F
MENU
] key

[ SQL ]

Press the DIAL knob
2. Rotate the
DIAL
knob to select [
DCS
] then press the
DIAL
knob.
3. Rotate the DIAL knob to select [ DCS ] then press the DIAL knob.
4. Rotate the DIAL knob to select the DCS code.
5. Press any key (except Power Switch) to finish the
setting and return to the original screen.
KEYPAD
SQL
RPT-R
DTMF
SCAN
HOME
TXPWR HIGH
AUTO
ARS
DCS
023
APRS OFF
DCS
023
• The DCS code set in the above operation is common for all transmissions with a DCS Code
(“DCS”, “D-ENC (DCS ENC)”, “T-DCS (TONE DCS)”, “D-TSQ (DCS TSQL)”).
• The default DCS code is “023”.
Searching for the DCS Code Used by the Other Station
Search for the DCS code used by the other station.
• The DCS search does not function in digital mode. Press the [ D X ] key to change from Digital
to Analog FM or AMS mode.
• To set the transceiver operation when scanning stops, press and hold the [ F
MENU
] key

[ 53 SCAN RESUME ]. This setting is common with the scan setting, tone search and DCS
search functions.
1. Press the [ F
MENU
] key

[ SQL ]

Press the DIAL knob
2. Rotate the DIAL knob to select [ DCS ] then press the DIAL knob.
3. Rotate the DIAL knob to select [ DCS ] then press the DIAL knob.
4. Press and hold the Microphone [ UP ] or [ DWN ] switch.
• The transceiver begins searching for a matching DCS code.
• When a corresponding DCS code is detected, the searching stops and the audio
is heard.
• Press the PTT switch or the [ UP ] or [ DWN ] switch to stop searching.
5. Press any key (except Power Switch) to save the detected DCS code and return to
normal operation.