Yaesu FTM-200DR, Advance Manual

Page: 18 / 67

18
Smart Navigation Function
GPS position information and voice signals are simultaneously transmitted in the V/D
mode of C4FM digital. Consequently, the position and direction of the remote station can
be displayed in real time, even while communicating.
To use the “latitude/longitude display” with the smart navigation function, press and hold the
[ F MENU ] key

[ 5 LOCATION INFO ] and set to “ NUMERIC ” . (The factory setting is
“COMPASS”)
Real-Time Navigation Function
1. Press and hold the [ F
MENU
] key

[ 7 DISPLAY MODE ]

Press the DIAL knob
2. Rotate the
DIAL
knob to select [
BACKTRACK
] then press the
DIAL
knob.
The distance and direction to the remote station operating on the same frequency in the
V/D mode are displayed.
The screen selected in “7 DISPLAY MODE” can be called by simply pressing and holding
the [ DISP ] key.
Callsign of other station
Direction to the other station
H UP: Heading up
N UP: North UP
Distance to other station
: Display of other station
: Display of this station
Heading of this station
On the real-time navigation screen, press the PTT switch to communicate with the
partner station by voice as usual. You can be also change the communication mode and
frequency, and recall memory channels.
z
Switch between partner station display and own station display
1. In the Real-Time Navigation screen, press the [ F
MENU
] key.
2. Rotate the DIAL knob to select “ ” (Display of other station) or “ ” (Display of
this station) then press the DIAL knob.
“ ” or “ ” icon is displayed on the screen.
Backtrack Function
By registering a navigation point in advance (such as the departure point), the distance
and direction to the registered point from the current position can be displayed in real
time.
z
Registering the Current Position (Departure Point)
1. In the Real-Time Navigation screen, press the [ F
MENU
] key.
2. Rotate the DIAL knob to select “ ” (Display of your station) then press the DIAL
knob.
3. Press the [ F
MENU
] key.