53
36 GPS DEVICE
Choose whether to use the built-in GPS or an external GPS device.
1. Press and hold the [
F
MENU
] key
[
36 GPS DEVICE
]
Press the
DIAL
knob
2. Rotate the
DIAL
knob to select the desired setting.
INTERNAL
Uses built-in GPS.
EXTERNAL
Uses GPS data from an external GPS device connected to the
EXT GPS jack on the front panel.
The data transmission speed of the EXT GPS jack is 9600bps and cannot be changed.
37 GPS LOG
Set the time interval for recording GPS position information to the microSD card.
1. Press and hold the [
F
MENU
] key
[
37 GPS LOG
]
Press the
DIAL
knob
2. Rotate the
DIAL
knob to select the time interval
OFF
/ 1 sec / 2 sec / 5 sec / 10 sec / 30 sec / 60 sec
If “OFF” is selected, no GPS Information is saved to the microSD memory card.
• Data saved to the microSD memory card is saved in yymmddhhmmss.log format.
• Saved data may be viewed by using OEM PC applications*.
*Yaesu does not provide technical support for PC applications.
AUDIO
38 RECORDING
Set the voice recording function.
1. Press and hold the [
F
MENU
] key
[
38 RECORDING
]
Press the
DIAL
knob
Refer to the Operating Manual for details.
39 REC/STOP
Starts or stops voice recording.
1. Press and hold the [
F
MENU
] key
[
39 REC/STOP
]
Press the
DIAL
knob
Refer to the Operating Manual for details.
SIGNALING
40 DTMF
Select the registered DTMF memory 0 to 9 and press
PTT
to automatically send the
DTMF code.
1. Press and hold the [
F
MENU
] key
[
40 DTMF
]
Press the
DIAL
knob
2. Rotate the
DIAL
knob to select the desired DTMF memory (1 to 9).
3. Press
PTT
.
For details, see “Transmitting DTMF code automatically using DTMF memory” (page 16).
NOTE
: This item is registered in the custom function menu by factory setting.
Summary of Contents for FTM-200DR
Page 1: ......