Yaesu FTM-200DR, Advance Manual

Page: 48 / 67

48
10 MIC GAIN
The sensitivity (gain) of the microphone can be adjusted.
1. Press and hold the [
F
MENU
] key

[ 10 MIC GAIN ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
The sensitivity can be selected from the following 5 levels.
MIN / LOW / NORMAL / HIGH / MAX
11 VOX
Set the VOX (Voice Operated Transmit) function ON/OFF, and VOX delay time.
1. Press and hold the [
F
MENU
] key

[ 11 VOX ]

Press the DIAL knob
Refer to the Operating Manual for details.
12 AUTO DIALER
Set method (Auto or Manual) to transmit the registered DTMF code.
1. Press and hold the [
F
MENU
] key

[ 12 AUTO DIALER ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
ON The auto dialer function is enabled.
OFF The auto dialer function is disabled.
For details, see “Setting the auto dialer function” (page 16).
13 TOT
The transceiver will automatically return to receive after transmitting continuously for a
specified time.
1. Press and hold the [
F
MENU
] key

[ 13 TOT ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
OFF / 1 min / 2 min / 3 min / 5 min / 10 min / 15 min / 20 min / 30 min
When the time-out-timer is active, a beep is sounded when a continuous transmission nears
the set time. About 10 seconds later, the transceiver returns to the receive mode.
The default settings depend on the transceiver version.
14 DIGITAL VW
Set the digital voice VW (Voice FR) mode selection.
1. Press and hold the [
F
MENU
] key

[ 14 DIGITAL VW ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
ON The digital voice VW (Voice FR) mode may be selected.
OFF
The digital voice VW (Voice FR) mode may not be selected.