49
4. To return to the normal operation screen, press a key other than the power switch or
PTT
.
The above settings are common for VFO scan, memory scan and programmable memory scan
(PMS).
Skip Memory Channels
Each memory channel can be set to be skipped during memory scan.
1. Press and hold the [
V/M
mw
] key.
The memory channel list appears.
The memory channel list can also be displayed by the following operations:
Press the [
F menu
] key
Select [
KEYPAD
]
Press the
DIAL
knob
Select [
MEMORY CH LIST
]
Press the
DIAL
knob
The last used memory channel is selected.
2. Rotate the
DIAL
knob to select the memory channel number that you do not want to
scan, and press the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
EDIT
], then press the
DIAL
knob.
4. Rotate the
DIAL
knob to select [
SCAN
].
5. Press the
DIAL
knob to select [
NO
].
6. Rotate the
DIAL
knob to select [
OK
], then press the
DIAL
knob.
7. When the confirmation screen is displayed, press the
DIAL
knob.
When the memory channel set as the skip memory is called, the “ ” icon is displayed.
To cancel the skip memory, set it to “YES” in step 5 above.
Programmable Memory scan (PMS)
This function scans only the range of frequencies between the lower and upper limits
registered in a pair of PMS Programmable Memory channels. 50 sets of PMS memory
channels (L01/U01 to L50/U50) are available.
For additional details on the Programmable Memory Scan (PMS) and Memory Bank Scan, refer to
the Advanced Manual which may be downloaded from the Yaesu website.
