Yaesu FTM-200DE Operating Manual Download Page 48

Page: 48 / 82

Switch between Auto Mode and Manual Mode

1. On the PMG screen, press the

DIAL

knob to switch each

time between Auto Mode and Manual Mode.

: Auto Mode

: Manual Mode

YAESU MUSEN

Auto Mode

• Scans channels registered in PMG continuously at

high speed. (The PMG channel number flashes during

scanning and there is no sound from the speaker.)

Operation example

in Auto Mode

YAESU MUSEN

Since the PMG 3CH signal has disappeared,

scanning is automatically resumed.

• Automatically stops at the channel with a signal and

outputs the received audio. When a channel is active,

the bar graphs of other channels pause and display the

last reception state.

• When there is no signal, scanning will resume after

about 1 second.

• When operating on the received channel, press the

PTT

DIAL

knob to switch to manual mode, which is

fixed to the selected channel for communication.

YAESU MUSEN

Receives signal with PMG 1CH and

selects automatically

Operation of Auto Mode

• Each time the

DIAL

knob is pressed, the Auto Mode and Manual Mode are toggled.

• Rotate the

DIAL

knob to change the channel while keeping the auto mode. If there is no

signal on the selected channel, scanning will resume automatically after about 1 second.

Summary of Contents for FTM-200DE



















































































Search results

Summary of Contents for FTM-200DE

Reviews:

Related manuals for FTM-200DE

Brands by name

Popular brands

Yaesu FTM-200DE, Operating Manual

Search results

Summary of Contents for FTM-200DE

Reviews:

Related manuals for FTM-200DE

Brands by name

Popular brands