34
5. To return to the normal operation screen from the Function List, press a key other than
the power switch or
PTT
.
6. To check whether or not other stations are operating within communications range,
press the [
GM
] key to turn the GM (Group Monitor) function ON.
• The other stations must also have the GM (Group Monitor) function ON.
• Refer to the separate Operating Manual GM Edition for details on how to use the
GM function (download the manual from our YAESU website).
7. Press the [
GM
] key to turn the GM (Group Monitor) function OFF and return to normal
operations.
• If the receive DG-ID is set to a number other than “00”, only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to “00” except when communication is
desired only with group members.
• The transmit and receive DG-ID default number is set to “00”.
Communicate only with the specific members by setting the DG-ID number
to other than “00”
Example:
Set the DG-ID number to “50”
1. Press and hold the [
GM
] key.
The DG-ID number setting screen will be displayed.
While setting the DG-ID number, pressing and holding the
DIAL
knob will set the transmit and the receive DG-ID numbers to
“00”.
2. Press the
DIAL
knob, and then rotate the
DIAL
knob to
set transmit DG-ID (DG-ID TX) number to “
50
”.
3. Press the
DIAL
knob again, then rotate the
DIAL
knob to
select the receive DG-ID (DG-ID RX).
DG-ID SETUP
DG-ID TX
DG-ID RX
4. Press the
DIAL
knob, and then rotate the
DIAL
knob to
set receive DG-ID (DG-ID RX) number to “
50
”.
5. To return to the normal operation screen from the Function
List, press a key other than the power switch or
PTT
.
Tuning to the same frequency and setting the same
DG-ID for all the group members will enable communication
between the members and exclude other signals.
DG-ID SETUP
DG-ID TX
DG-ID RX
