47
Manual Mode
• The channel is fixed, and you can turn the DIAL knob
to select the desired channel and communicate.
• If there is no signal on the selected channel, scanning
continuously displays the reception status (signal
strength) of other channels in a bar graph. (Received
audio is not output even if there is a signal on another
channel.)
Operation example
in Manual Mode
YAESU MUSEN
Since there is no signal on the selected
PMG 2CH, the bar graph is displayed
continuously.
• If there is a signal on the selected channel, the received
audio is output. During audio output, the bar graphs of
the other channels hold their last state and pause.
• When the signal on the selected channel concludes,
scan is automatically restarted and the bar graph is
displayed continuously.
YAESU MUSEN
Since the signal was received by the
selected PMG 2CH, the bar graph
display is paused and the received
sound is output.
Operation of Manual Mode
• In manual mode, the channel is fixed. Rotate the
DIAL
knob to select the desired
channel.
• Press PTT to communicate with other stations on the selected PMG channel.
• Each time the
DIAL
knob is pressed, the auto mode and manual mode are toggled.
Unregister the channel (frequency) registered in PMG
Up to 5 channels can be registered in PMG. To register a new frequency, cancel the
registration of one frequency and then register the new frequency.
1. Select the channel (frequency) to be unregistered by touching the bar graph or rotating
the
DIAL
knob.
2. Press and hold the [
PMG
PW
] key to cancel the registration.
• Channels after the canceled channel have the previous number.
• When all registered channels are lost, PMG will be canceled and the screen will
return to the original screen.
Cancel all frequency (channels) registered in PMG.
1. Press and hold the [
F
menu
] key
→ [
20 PMG CLEAR
]
2. Press the
DIAL
knob.
