Yaesu FTDX-9000MP, Operation Manual

Page: 59 / 180

Page 57 FT
DX
9000MP O
PERATION
M
ANUAL
CCCCC
ONVENIENT ONVENIENT
ONVENIENT ONVENIENT ONVENIENT
F F F F F
EA EA
EA EA EATURES
TURES
TURES TURES TURES
B
AND
S
TACK
O
PERATION
The FT
DX
9000MP utilizes a triple band-stack VFO selection technique, that permits you to store up to three favorite
frequencies and modes onto each band’s VFO register. For example, you may store one frequency each on 14 MHz CW,
RTTY, and USB, then recall these VFOs by successive, momentary presses of the [
14
] MHz band key. Each Amateur band
key may similarly have up to three frequency/mode settings applied. Both the Main (VFO-A) and Sub (VFO-B) systems
have their own, independent, band stacks.
A typical setup, for the 14 MHz band, might be arranged
like this:
1. Program 14.0250 MHz, CW Mode, then press the [ 14
]
MHz [ BAND
] key;
Band Stack1
Frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
BAND
Key
1.8
3.5
5
7
10
14
18
21
24
28
50
GEN
Band Stack2
Frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
Band Stack3
Frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
2. Program 14.080 MHz, RTTY Mode, then press the
[
14
] MHz [
BAND
] key;
3. Program 14.195 MHz, SSB Mode, then press the [ 14
]
MHz [
BAND
] key.
With this configuration, successive momentary presses of
the [
14
] MHz [
BAND
] key will allow you to toggle se-
quentially through these three VFOs.
VDD TEMP SWR BIAS
[BAND] Key