45
Error Message Guide
Error messages and explanations.
䢢䢢䢢䢢䣛䣃䣇䣕䣗䢯䣖䣕䣗䣔䣋䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢷
䢢
䣐䣱䢢䣆䣣䣶䣣
Displayed when trying to receive data from a local node or a
connection node, but no data was available.
The error message will be displayed for 2 seconds, and then
the previous screen will reappear.
䢢䢢䢢䢢䣛䣃䣇䣕䣗䢯䣖䣕䣗䣔䣋䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢷
䢢
䣐䣱䣶䢢䣅䣱䣰䣰䣧䣥䣶䣧䣦
Displayed in one of the following scenarios:
The error message will be displayed for 2 seconds.
• Connection was lost between the local node and the
connection destination node.
• While another transceiver was attempting to establish
connection to a node via the local node, the node was
already connected to another node.
䢢䢢䢢䢢䣛䣃䣇䣕䣗䢯䣖䣕䣗䣔䣋䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢷
䢢
䣄䣷䣵䣻䢢䣇䣴䣴䣱䣴
Displayed for 2 seconds when trying to establish connection to
a node via the local node, but the node itself was connected to
another node (except when another transceiver is involved).
䢢䢢䢢䢢䣛䣃䣇䣕䣗䢯䣖䣕䣗䣔䣋䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢷
䢢
䣑䣨䣨䣮䣫䣰䣧䢢䣇䣴䣴䣱䣴
Displayed for 2 seconds when trying to establish connection
to a node via the local node, but the node could not be found
(power off, Internet disconnected, etc.).