12
Connecting to a Faraway Station Using WIRES-X
7
Rotate
O
to select the connection destination
8
Press
H
The FT1DR/DE will initiate connection and [Waiting] will
flash.
Tip
Instead of
H
, you can press
p
to establish connection
while continuing to transmit from your transceiver
When connection is successfully established,
[Connected] will appear, followed by the menu list of the
connection destination.
Tip
If connection is unsuccessful, an error message will appear
and the screen will return to the list of nodes and rooms.
For an explanation of error messages, please refer to the
“Error Message Guide” (page 45).
䣈䣑䣑䣖䣄䣃䣎䣎䢲䢷䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢 䢢䢢䢳䢶
䣈䣑䣑䣖䣄䣃䣎䣎䢲䢲䢵䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢 䢢䢢䢳䢴
䣈䣑䣑䣖䣄䣃䣎䣎䣅䣎䣗䣄䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢳䢲
䣈䣑䣑䣖䣄䣃䣎䣎䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢 䢹
Tip
You can list items in order according to the number of activities or access history from
[7 WIRES-X]
→
[3 SEARCH SETUP]
in setting mode.
●
Connecting to the node or room you have most recently connected
If you have previously connected to a node or room, it will be displayed and flashing at
the bottom of the screen.
When this happens, press
H
to start connection, and once connection is established,
A list of available nodes will appear.
If there is a to the left of the node name, rotate the
O
to
display the node you have most recently connected to.
Tip
If connection is unsuccessful, an error message will appear
and the node name will return to flashing mode.
For an explanation of error messages, please refer to the
“Error Message Guide” (page 45).
䢶䢵䢲䢰 䢺䢲䢲䢢
䣆䣐
䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳䢢䣕䣊䣋䣐䣃䣉䣃䣙
䣌 䣃 䢳䣜䣔 䣎 䢯䢹 䢺 䢻䢢䣕䣊䣋䣐䣃䣉䣃䣙
●
Specifying the DTMF ID of the desired node or room
1
Press
F
2
Press
V
The DTMF input screen will appear.
3
Enter the 5-digit DTMF ID
4
Press and hold
H
for 1 second or more
Tip
Press
V
to cancel input.
䢢䢢 䢢
ų
伪
䣆䣋䣔䣇䣅䣖䢢䣇䣐䣖䣔䣛
