![background image](http://html2.mh-extra.com/html/yaesu/ft1dr/ft1dr_instruction-manual_3153488039.webp)
39
Using WIRES-X and the GM Function Simultaneously
You can use WIRES-X even when using the GM (Group Monitor) function on the
FT1DR/DE transceiver. By forming a group including local nodes and organizing the
GM, group members can also utilize WIRES-X to communicate with a node or room on
the Internet, including exchanging data.
This section explains how to use a local node which is registered as a group member.
For details on how to use the GM functions, refer to the separate GM instruction manual
available on our website.
Cautions
z
The local node must be a digital station and have the GM function enabled as well.
z
Before using the GM functions, press
%
to set communication mode of band A (shown on the
top part of the screen) to any mode other than [FM]. For details, refer to “Selecting Communication
Mode” in the basic operating manual.
Registering a local node with a group
1
Check the call sign of the local node
2
Set band A to the frequency used for the GM operation
3
Press
D
The group list will appear.
4
Rotate
O
to select
[ALL]
5
Press
H
Call signs, distance and direction to other nearby
stations will appear.
Tip
Stations within communication range are highlighted.
䢢䢢䢢䢢 䢢 䣃䣎䣎
䢢䢢䢢䢢䢢 䣉䣔䣑䣗䣒䢢䢢䢲 䢳
6
Rotate
O
to select a local node
7
Press
H
The call sign of the local node will flash.
8
Press and hold
H
for 1 second or more
The group list will appear.
䣉䣏䢢䢳䢶䢷 䢰 䢹䢸䢲䢢
䣆䣐
䢢
䣌 䣃 䢳 䣜 䣔 䣎 䯌䢳 䢴 䢵䢢䢢䢢䢢䢢䢢䢢䢴 䣭 䣯䢢䢢䣇
䢢 䣌 䣊 䢳䣛 䣒 䣅 䯌 䢲 䣃䣄䢢䢢䢢䢢 䢶䢵䣭 䣯䢢 䣐
䣌 䣓 䢳䣛 䣄 䣉 䯌 䢳 䢴 䢵䢢
䢴
9
Rotate
O
to select a group where you want to
register the local node
10
Press
H
The local node will be added to the selected group
䢢䢢䢢䢢 䢢
䣃䣎䣎
䢢䢢䢢䢢䢢 䣉䣔䣑䣗䣒䢢䢢䢲 䢳