![background image](http://html2.mh-extra.com/html/yaesu/ft1dr/ft1dr_instruction-manual_3153488019.webp)
19
Connecting to a Faraway Station Using WIRES-X
2
Speak into
[MIC]
Tip
Place the microphone about 5 cm away from your mouth when you speak.
Caution
Do not continuously transmit over an extended period of time to reduce the risk of
overheating, malfunction, or injury.
3
Release
p
The FT1DR/DE will return to receive mode.
Disconnecting from a node or room
While pressing
p
, press the #99999 (DTMF disconnection command) key.
Various display functions
Confirming the digital node location
When the signal from the local node you are connected to contains GPS location
information, you can display the location data on the screen.
While viewing the connection destination screen, press
F
, and while
F
is displayed
on the destination screen, press
M
to display the compass screen. The direction and
distance from the present station to the local node will be displayed.
Press
M
again to return to the connection destination screen.
䢶䢵䢲䢰 䢺䢲䢲䢢
䣆䣐
䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳䢢䢢䣕䣊䣋䣐䣃䣉䣃䣙
→
M
←
䢢䣚䢢䢶 䢵 䢲 䢰 䢺 䢲䢲
䢢䣎䣐 䢢䢢䢢䢢䢢䢶 䢵 䢰 䢲 䣭䣯
Y R
M Y
L1 L 2
Tip
When [NUMERIC] is selected from
[1 DISPLAY]
→
[2 TARGET LOCATION]
in the setting mode, the
latitude & longitude screen appears instead of the compass screen.
Confirming the frequency
On the WIRES-X screen, press
V
to change to the frequency display screen that was
displayed before using WIRES-X. Press
V
again to return to the WIRES-X screen.