Richard Barr Hibbs, P.E.
(KI6AQW)
FT-60R
Quick
Guide
July 10, 2011
Page 5
Set Mode Item Function Available
Values
(Default)
55 [WID.NAR] Select Wide (±5 kHz) or Narrow
(±2.5 kHz) TX Deviation.
WIDE
/
NARROW
56 [WX ALT]
Enables/Disables the Weather Alert
Scan feature.
ALT.OFF
/ ALT.
ON
S
ET
M
ODE
(
BY
F
UNCTION
)
C
ATEGORY
/Function Set
Mode
Item
Number
Available Values
(Default)
R
EPEATER
S
ETTINGS
Enables/Disables the Automatic
Repeater Shift function.
4 [ARS]
ARS.ON
/
ARS.OFF
Sets the Repeater Shift Direction.
(Default depends on radio version.)
38 [RPT.MOD] RPT.OFF / RPT.–
/ RPT.+
Sets the magnitude of the repeater Shift.
(Default depends on radio version.)
45 [SHIFT]
0.00 - 99.95 MHz
CTCSS
S
ETTINGS
Selects the number of CTCSS/DCS Bell
ringer repetitions.
7 [BELL]
OFF
/
1T / 3T /
5T / 8T / CONT
Selects the DCS code.
13 [DCS.COD] 104 standard DCS
codes
(023)
Enables/Disables “Inverted” DCS code
decoding.
14 [DCS.N/R]
T/RX N,
RX R,
TX R, T/RX R
Sets the DTMF Autodialer Delay Time. 15 [DT DLY]
50MS / 100MS /
250MS /
450MS
/
750MS / 1000MS
Sets the DTMF Autodialer Sending
Speed.
16 [DT SPD]
50MS
/
100MS
Programs the DTMF Autodialer. 17
[DT
WRT]
---
Enables/Disables split CTCSS/DCS
coding.
47 [SPLIT]
SPL.OFF
/ SPL.
ON
Selects the Tone Encoder and/or
Decoder mode.
48 [SQL.TYP]
OFF
/
TONE /
TSQL / REV TN /
DCS
Selects the CTCSS Tone Frequency.
50 [TN FRQ]
50 standard
CTCSS tones
(100
Hz)
ARTS
S
ETTINGS
Selects the Beep option during ARTS
operation.
2 [AR BEP]
INRANG
/
ALWAYS / OFF