FT-60R Quick Guide
(KI6AQW)
Richard Barr Hibbs, P.E.
Page 4
July 10, 2011
Set Mode Item Function Available
Values
(Default)
35 [RESUME]
Selects the Scan Resume mode.
BUSY
/
HOLD /
TIME
36 [REV/HM]
Selects the function of the [HM/RV]
key.
<REV>
/ <HOME>
37 [RF SQL]
Adjusts the RF Squelch threshold
level.
S-1 / S-2 / S-3 / S-4 /
S-5 / S-6 / S-8 / S-
FULL /
OFF
38 [RPT.MOD] Sets the Repeater Shift Direction.
(Default depends on radio version.)
RPT.OFF / RPT.– /
RPT. +
39 [PRI.RVT]
Enables/disables the Priority Revert
feature.
RVT.OFF
/
RVT.ON
40 [RX MOD]
Selects the receiving mode.
AUTO
/
FM / AM
41 [RXSAVE]
Selects the Receive-mode Battery
Saver interval (“sleep” ratio).
200 MS
/ 300 MS /
500 MS / 1 S / 2 S /
OFF
42 [S SRCH]
Selects the Smart Search Sweep
mode.
SINGLE
/ CONT
43 [SCN MD]
Selects Memory Scan or the channel-
selection mode.
ONLY
/
MEM
44 [SCN.LMP] Enables/Disables the Scan lamp while
paused.
ON
/
OFF
45 [SHIFT]
Sets the size of the repeaters shift.
(Default depends on radio version.)
0.00-99.95 MHz
46 [SKIP]
Selects the Memory Scan “Skip”
channel-selection mode.
OFF
/
SKIP /
ONLY
47 [SPLIT]
Enables/Disables split CTCSS/DCS
coding.
SPL.OFF
/ SPL.ON
48 [SQL.TYP]
Selects the Tone Encoder and/or
Decoder mode.
OFF
/
TONE /
TSQL / REV TN /
DCS
49 [STEP]
Setting of the synthesizer steps.
5 / 10 / 12.5 / 15 / 20
/ 25 / 50 / 100 kHz,
or
AUTO
50 [TN FRQ]
Setting of the CTCSS Tone
Frequency.
50 CTCSS tones
(100 Hz)
51 [TOT]
Setting of the Time-Out Transmitter
timer.
1MIN - 30MIN of
OFF
52 [TX.LED]
Enables/Disables the TX LED while
the radio is transmitting.
LED ON
/
LED.OFF
53 [TXSAVE]
Enables/Disables the Transmitter
Battery Saver.
SAV.OFF /
SAV.ON
54 [VFO.BND]
Enables or disables the VFO band
edge limiting for the current band.
BAND
/
ALL