FT-60R Quick Guide
(KI6AQW)
Richard Barr Hibbs, P.E.
Page 2
July 10, 2011
R
ADIO
F
UNCTIONS
S
ET
M
ODE
(
BY
M
ODE
I
TEM
N
UMBER
)
Set Mode Item Function Available
Values
(Default)
1 [APO]
Setting of the Automatic Power-Off
feature.
OFF
/ 0.5H - 12.0H
2 [AR BEP]
Selects the Beep option during ARTS
operation.
INRANG
/
ALWAYS / OFF
3 [AR INT]
Selects the Polling Interval during
ARTS operation.
25 SEC
/ 15 SEC
4 [ARS]
Enables/Disables the Automatic
Repeater Shift function.
ARS.ON
/ ARS.OFF
5 [BCLO]
Enables/Disables the Busy Channel
Lock-Out feature.
BCL.ON /
BCL.OFF
6 [BEEP]
Enables/Disables beeper.
KEY+SC
/ KEY /
OFF
7 [BELL]
Selects the number of CTCSS/DCS
Bell ringer repetitions.
OFF
/ 1T / 3T / 5T /
8T / CONT
8 [BSY.LED]
Enables/Disables the BUSY LED
while the squelch is open.
LED.ON
/
LED.OFF
9 [CLK.SFT]
Shifting of the CPU clock frequency.
SFT.OFF
/ SFT.ON
10 [CWID]
Enables/disables the CW identifier
during ARTS operation.
TX OFF
/ TX ON
11 [CW WRT]
Programs and activates the CW
Identifier.
---
12 [DC VLT]
Indicates the DC Supply Voltage
---
13 [DCS.COD] Setting of the DCS code.
104 DCS codes,
(023)
14 [DCS.N/R]
Enables/Disables “Inverted” DCS
code decoding.
T/RX N,
RX R, TX
R, T/RX R
15 [DT DLY]
Setting of the DTMF Autodialer
Delay Time.
50MS / 100MS /
250MS /
450MS
/
750MS / 1000MS
16 [DT SPD]
Setting of the DTMF Autodialer
Sending Speed.
50MS
/ 100MS
17 [DT WRT]
Programming of the DTMF
Autodialer.
---
18 [EAI]
Enables/disables the Emergency
Automatic ID (EAID) feature.
INT.1M-INT.50M /
CON.1M-CON.50M
/
OFF
19 [EDG.BEP]
Enables/Disables the Band-edge
beeper while selecting the frequency
via the DIAL knob.
BEP.OFF
/
BEP.ON