77
FT-2900R O
PERATING
M
ANUAL
“S
ET
”
(
M
ENU
)
M
ODE
M
ENU
S
ELECTION
D
ETAILS
24 INT.A/M
Function
: Enables/Disables DTMF Autodialer feature while using the Internet Connection
feature.
Available Values
: MANUAL / AUTO
Default
: MANUAL
25 INT.SET
Function
: Selects the memory register for an Access Number (DTMF code) for non-WiRES
Internet Link System access.
Available Values
: F0 - F9
Default
: F1
26 LOCK
Function
: Selects the Control Locking Lockout combination.
Available Values
: KEY / DIAL / K+D / PTT / K+P / D+P / ALL
Default
: OFF
Note
: “K” = “Key;” “D” = “Dial;” and “P” = “PTT.”
27 MCGAIN
Function
: Adjust the microphone gain level.
Available Values
: 1 - 9
Default
: 5
28 MEM.SCN
Function
: Selects the Memory Scan mode.
Available Values
: TAG1 / TAG2 / ALL CH
Default
: ALL CH
ALL CH: The scanner sweeps all Memory channels.
TAG1:
The scanner sweeps only those Memory channels with the same “first” digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2:
The scanner sweeps only those Memory channels with the same “first” and “sec-
ond” digits of the alpha/numeric tag as the first channel on which scanning started.
29 MW MD
Function
: Selects the method of selection of channels for Memory Storage.
Available Values
: NEXT / LOWER
Default
: NEXT
NEXT: Stores the data into the memory channel which is next-highest from the
last-
stored
memory channel.
LOWER: Stores the data into the lowest-available “free” channel.
