78
FT-2900R O
PERATING
M
ANUAL
“S
ET
”
(
M
ENU
)
M
ODE
M
ENU
S
ELECTION
D
ETAILS
30 NM SET
Function
: Programming an Alpha/Numeric label for a Memory Channel.
See page 37 for details.
31 OPN.MSG
Function
: Selects the Opening Message that appears when the radio is powered on.
Available Values
: DC / MSG / OFF
Default
: DC
DC:
DC supply voltage
MSG: Set by user. See below.
OFF: No Opening Message
Here’s how to program the Opening Message:
1. Set this Set Mode Item to “
MSG
MSG
MSG
MSG
MSG
.”
2. Press the [
LOW
(
A/N
)] key momentarily to enable programming of the opening mes-
sage. You will notice the first character entry’s location blinking.
3. Rotate the
DIAL
knob to select the first letter/number of the message, then press the
[
LOW
(
A/N
)] key momentarily to save the first letter/number and move on to the next
character.
4. Repeat the previous step as necessary to complete the message (up to six characters).
5. If you make a mistake, press the [
DW
(
REV
)] key to back-space the cursor; now re-
enter the correct letter/number.
6. When you have entered the desired opening message, press the [
MHz
(
SET
)] key mo-
mentarily to confirm the message, then press and hold in the [
MHz
(
SET
)] key for one
second to save the settings and exit to normal operation.
32 PAGER
Function
: Enables/Disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values
: ON / OFF
Default
: OFF
33 PAG.ABK
Function
: Enables/Disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch function.
Available Values
: ON / OFF
Default
: OFF
34 PAG.CDR
Function
: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch
function.
See page 27 for details.
