30
FT-2900R O
PERATING
M
ANUAL
CTCSS/DCS/EPCS O
PERATION
S
PLIT
T
ONE
O
PERATION
The
FT-2900R
can be operated in a “Split Tone” configuration, to enable operation on
repeaters using a mix of both CTCSS and DCS control via the Set mode.
1. Press and hold in the [
MHz
(
SET
)] key for one second, then
rotate the
DIAL
knob to select “
48 SPLIT
48 SPLIT
48 SPLIT
48 SPLIT
48 SPLIT
.”
2. Press the [
MHz
(
SET
)] key, then rotate the
DIAL
knob to
set this Menu item to “
ON
ON
ON
ON
ON
” (to enable the Split Tone fea-
ture).
3. Press and hold in the [
MHz
(
SET
)] key for one second to save the new setting and exit
to normal operation.
When the Split Tone feature is activated, you can see the following additional parameters
following the “
RV TN
RV TN
RV TN
RV TN
RV TN
” parameter (while selecting the tone mode by Set mode item “
49
49
49
49
49
SQL.TYP
SQL.TYP
SQL.TYP
SQL.TYP
SQL.TYP
”):
D CODE
D CODE
D CODE
D CODE
D CODE
: DCS Encode only (the “
DCS
” icon will blink during operation)
T DCS
T DCS
T DCS
T DCS
T DCS
:
Encodes a CTCSS Tone and Decodes a DCS code
(the “
T
” icon will blink and the “
DCS
” icon will appear during operation)
D TONE
D TONE
D TONE
D TONE
D TONE
: Encodes a DCS code and Decodes a CTCSS Tone
(the “
T SQ
” icon will appear and “
DCS
” icons will blink during operation)
Select the desired operating mode from the selections shown above.
