35
FT-2900R O
PERATING
M
ANUAL
S
TORING
I
NDEPENDENT
T
RANSMIT
F
REQUENCIES
(
“O
DD
S
PLITS
”
)
1. Store the receiving frequency using the method already described.
2. Tune to the desired transmit frequency, then press and hold in the [
D/MR
(
MW
)] key for
one second.
3. Within five seconds of pressing the [
D/MR
(
MW
)] key, use the
DIAL
knob or micro-
phone [
UP
]/[
DWN
] buttons to select the same memory channel number used in step 1
above.
4. Press and hold in the
PTT
switch, and press the [
D/MR
(
MW
)] key momentarily while
holding in the
PTT
switch. This will not cause transmission, but rather it will instruct
the transceiver that you are
programming
a separate
transmit
frequency into memory.
Whenever you recall a memory which contains independently-
stored transmit and receive frequencies, the “
” indication
will appear in the display.
The “Odd Splits” feature can store separate CTCSS/DCS functions for the receive and
transmit frequencies.
When you recall a memory channel which contains indepen-
dently stored CTCSS/DCS information, the decoder icon will
appear solid, and the encoder icon will blink on the display.
To confirm the memorized frequency/code:
1. Press and hold in the [
MHz
(
SET
)] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select “
14 DCS CD
14 DCS CD
14 DCS CD
14 DCS CD
14 DCS CD
” when the
receiver CTCSS/DCS function is set to “DCS”, or select
“
52 TN FRQ
52 TN FRQ
52 TN FRQ
52 TN FRQ
52 TN FRQ
” when the receiver CTCSS/DCS function is
set to “TONE SQUELCH”.
3. Press the [
MHz
(
SET
)] key momentarily to indicate the
memorized frequency/code for the receiver.
4. Press the [
REV
(
DW
)] key to indicate the memorized fre-
quency/code for the transmitter. You can confirm the Trans-
mit and Receive TONE/DCS by alternately pressing of the
[
REV
(
DW
)] key.
M
EMORY
O
PERATION
: Receive tone/DCS
: Transmit tone/DCS
