— 18 —
With the factory settings, Gateway has the 1st server enabled and pre-configured
use TCP port 1456 and the NMEA 0183 data protocol. To connect your application
to the Gateway with factory settings:
• connect your laptop or mobile device to YDWG network;
• set the IP address 192.168.4.1 in the application settings;
• specify the TCP protocol and port 1456 in the application settings.
To use the gateway with a Navionics Boating App, no settings are required in the app,
but some changes are required in the Gateway configuration:
•
configure one of the Gateway servers to use UDP port 2000 and NMEA 0183
data protocol;
• connect your smartphone or tablet to the Gateway’s Wi-Fi network.
Some versions of Nobeltec MaxSea and TimeZero ignore sentences with «--» talker
ID (used by default in previous firmware versions) and you need to change it
to something else, for example, to «YD» (see X.2).
The settings on the “NMEA Settings” page are designed to control an autopilot
by NMEA 0183 protocol and tune NMEA 0183 output settings, see chapter X.
for details.
