②
Level indicator
The selected intensity level will be indicated. The higher the number, the stronger will be the power of the
flash.
In addition, this indicator will let you know when there is an error (See “Error indications” on page 27.)
③
READY lamp
White light: When the treatment window is in proper contact with the skin after preparations have been
completed (emission is possible).
Light is off: When the treatment window is not in proper contact with the skin.
④
Meter indicator
The meter gradually rises until all lamp bars are lit to notify the user that the device is ready to emit
flashes.
When in roller mode: The number of continuous flash pulses remaining (max. seven) is indicated.
<Single mode only>
⑤
BODY mode/FACE mode indicator
The site (body or face) at which the device can be used is indicated.
Press the power/level button to select the treatment site and the intensity level.
⑥
Flash button
Brightness of the environment in which the device is used
A usage environment that is too dark may cause an injury to the eyes.
The recommended usage environment is atop a table in a room with ceiling lights.
Refrain from using the device in any of the following locations:
・
Room with indirect lighting
・
Room that is lit by a miniature bulb or otherwise with lighting that is excessively dark
・
Under a table or otherwise in the shadows
①
Power/level button
On: Connect the AC adapter and hold down the button (approx. 3 seconds) to turn on the device.
Roller mode: Standby state (meter indicator will blink in a blue color).
Single mode: The
②
level indicator,
④
meter indicator, and
⑤
BODY mode / FACE mode indicator
will be lit.
For more details on modes, see “Modes” (page 11).
Off: After holding down the button (approx. 3 seconds), the indicator panel will turn off and the device will
then shut down.
Level selection:
Each time the button is pressed, the level will go up by one level. The selected level will be indicated
by the
②
level indicator.
* The level that can be selected will differ according to mode.
④
Meter indicator (blue)
③
READY lamp (white)
①
Power/level button
②
Level indicator (white)
Single FACE mode
level 1
→
2
→
3
Single BODY mode
level 1
→
2
→
3
→
4
→
5
By engaging this button with a short push when READY lamps
③
and
⑦
are lit and showing a white
color, a flash pulse will be discharged. By engaging this button with a long push, ten flash pulses will be
discharged in sequence.
⑦
READY lamp
White light: the treatment window is in proper contact with the skin after preparations have been completed
(emission is possible).
Light is off: When the treatment window is not in proper contact with the skin.
14
13
Indicator panel
Before using
Before using
⑥
Flash button
⑤
BODY mode /
FACE mode
indicator
BODY (green)
FACE (white)
⑦
READY lamp
(white)
Only in single mode
